[rocker9455]

OK,
So i have a big box (well in terms of spudding) of millions of bits relevant to making cannons which i originally purchased from ali his great and i have added a few bits myself

Included are:
- 1 3/4" QEV with broken piston (i.e. needs a new one)
- 1 working 3/4" QEV
- 11 rolls of hardly used yellow PTFE tape (the thick stuff)
- 1 roll-ish of thin ptfe tape (probably half left if that)
- 400 PSI pressure gauge
- 3/4" to 1/4" bsp adapter
- 1/4" elbow
- 1/4" T (male, male, female)
- 1/4" Coupler
- 1/4" T (all male)
- Beefy check valve from technobots (1/4")
- Quick connect male
- check valve with screw in schrader
- 2 1/4" couplers
- a very stiff blogun which does work
- a good working blogun
- 3/4" coupler
- crap 3/4" to 22m elbow which doesnt hold pressure
- good 3/4" to 22m elbow
- 2 BBQ Lighters
- 1/2" ball valve (male to female)
- 1/2" elbow
- 1/2" to 1/4" adapter
- 1/2" to 22mm elbow
- 1/4" push valve for compressor with matching male end with 1/4" bsp threads
- some odd slide valve
- another check valve and 1/4" coupler male, male
- schrader to 1/4" male
- 3/4" to 22mm
- 22mm brass fitting nut (i.e. for elbows etc)
- another schrader to 1/4"
- a few other brass fittings for 1/4" which aren't very relative

AND FINALLY
A Paintball tank with custom made adapter allowing a 3/4" BSP coupler to be attached
The tank cost £30 its a 0.8L one and the adapter made goes from 7/8" UNF to 1/4" BSP and then a femal 1/4" BSP to female 3/4" BSP

I'm taking offers, Payment via paypal gift and i have no idea how much postage will be so depending on who buys this (i.e. whether i have had any previous contact with you) il send it off and then bill the postage after i know what it is or estimate it before hand

well thanks for reading my hideously long list with lots of repeats (i listed the parts as i took them out of the box. . .)

Cheers Guys,
Will

[rocker9455]

Oh and i will get pictures up at some point

[Jogumpie]

Ohhh count me in! I would like....

that 1/4" threaded schrader valve
1/4" check valve
3/4" to 1/4" adaptor
3/4" QEV (working)
1/4" tee
two 3/4" elbows (threaded)
and a blowgun. (the good one)

(plus some PTFE)

[rocker9455]

Im going to check the 'non working' 3/4" QEV tommorrow, cause i reckon it works!
Jogumpie you said £25 - £30 excluding P&P?
erm. . . you said 2 3/4" to 22mm elbows, im assuming you meant the crap one which doesnt hold pressure and the good one? you sure you want that bad one?
Assuming its everything in the picture below, Il take £30 or you could buy everything for £60 (including the CO2 bottle and adapter)


Oh but apart from the little brass 1/4" female to female and with 2 rolls of ptfe

[rocker9455]

everything without the CO2 bottle and adapter il take £30 (edit: excluding Jogumpie list, sorry i didn't make that clear)
and the CO2 and adapter alone i will take £20

all these prices excl. postage.

Jogumpie has bought everything on his list so everything apart from that is still available!

[rocker9455]

http://img513.images...411024x768.jpg/

[Jogumpie]

That all looks brilliant. Could I not have the broken one but a standard 22mm compression fitting?




Thanks.

[Jogumpie]

WOW. I just realised that i could have gotten everything for £30... but i'm nice so I wont demand for a refund



Think of it as an overpriced tip

[rocker9455]

i said £30 without postage so no you couldnt! anyway your getting a few good freebies as i've chucked a few things in there!

[Jogumpie]

Yeah, and I'm paying £35 (£30 + £5 p&p)


But don't worry. I dont care that much.



EDIT: Your email is will.price94@gmail.com yes? im just making sure as it's quite a bit of money.

[rocker9455]

yes i got the money and that is my email (looking forward to the spam emails ) oh and you have totally confused me! BTW i cant post today 'cause its a bank holiday!

[Jogumpie]

Ok.

You offered £30 for everything.

I paid £30 for the stuff i got.

Plus £5 pp


That means i could have gotten everything there (excl. Co2) for what I Paid.

Cool?



But don't bother now, I don't mind

[rocker9455]

Haha, no i meant everything excluding what you wanted i.e. your stuff plus the other stuff would be £60 but you just wanted the 3/4" QEV etc after that had gone, thats what i meant by everything else!
LOL that took a long time to clear up xD

[Jogumpie]

Oooooooohhhhhhhhhh! Ok I get it now.

[rocker9455]

Lol, twas my fault i phrased that terribly!

[Jogumpie]

Everything came today, party poppers and all

[rocker9455]

HAHA! I got a bag of 200 for xmas and had no idea what to do with them
Oh well, i hope the parts go to good use and i cant wait to see your new cannon

[Jogumpie]

Well i'm now debating weather it should be a HPA gun, dont see too many around here.

[qwerty]

Why are you getting rid of the stuff anyway? It could prove useful in the future.

[rocker9455]

I don't really spud much and im trying to get funds for building a new bike up which isn't cheap to say the least!